Solar San Diego Installation Type Spanish Tile
There are three way to install a Hardy Solar San Diego electric system. One way is to remove the tile from the roof in the area in which solar is to be installed and we come in and install mounting hardware and a roofer comes back and installs the tile and then we install the tile. Another way is to drill through the tile in order to install the solar. The problem with both of these methods is it can be difficult especially with brittle or thin tile roof not to damage the tile during the installation process.
The third way to install Solar Electric is to remove the tile in the area that the solar is to be installers and re-roof with rolled roofing underneath. This is the easiest and most practical approach. This is the method shown here.
First we remove the spanish tile where the Solar San Diego system will be installed as shown below.
Next step involved with installing solar with this method id to re-roof with rolled roofing as shown below.
After the exposed section of the solar roof has been re-roofed with high quality rolled roofing the standoffs and rails are installed as shown.
We like to use a white heat reflecting roof sealer over the roofing material and under the solar panels. This serves several purposes. The most important thing is that Solar produces better in cool conditions. It also gives the rolled roofing additional coat of protection.
Here is a close up of what it looks like when finished. From this view it is possible to see the rolled roofing underneath. From most angle however the solar panels cover the rolled roofing and it is not visible.
Open 9:00 am - 5:00 pm Pacific Time. Call 800-341-7027 or 619-669-1995 for .
Payment terms 2% discount for ACH or wire transfer. Visa, Master card accepted.
| Hardy Solar 15749 Lyons Valley Rd. Jamul CA 91935 Toll Free: (800) 341 7027 Int: (619) 669 1995 |
 |